Tamiya 1:35 Iraqi Tank T-55 “Enigma” • Kit No. 35324
The T-34 was the backbone of the Soviet Union’s armoured force from 1941 onward. Although the powerful IS-2 and IS-3 were also developed during the Great Patriotic War, a strong focus was kept on the mass production of the effective, but by no means perfect, T-34.
By 1943, Soviet tanks found themselves pitted against daunting German super- Panzers and tank destroyers including Tigers and Panthers. It was clear that future enemies would also field such dangerous adversaries, so work began on a new Soviet tank design that was up to the challenge.
The prototype for the new T-54 tank was produced just before the end of the war in February 1945. This was an all-new design with a low silhouette and rounded turret, with five large road wheels on each side, powered by a 12 cylinder diesel engine and armed with the 100 mm D-10T cannon.
The T-55 was initially developed as a response to the need for nuclear, biological, and chemical protection of the vehicle and its crew. The T-55 received the new V-55 12-cylinder 4-stroke onechamber 38.88 litre water-cooled diesel engine, improved armour and increased ammunition stowage.
The T-54 and T-55 are simple tanks that are relatively inexpensive to maintain and easy to crew. These attributes have made the T-54/55 very popular as an export type to Warsaw Pact, Middle Eastern and developing nations.
Over a period of six decades, the T-54/55 has been subject to many upgrades and modifications, and holds the distinction of being the most numerous tank in history. Production is estimated to be between 86,000 and 100,000.
Iraq took delivery of thousands of T-54s and T-55s from 1958 until 1985. These were used comprehensively in the Iran Iraq wars, against Coalition forces in the 1991 Gulf War and again in 2002’s Operation Iraqi Freedom. Around 1,500 T-54s, T-55s and TR-580s were in service with the Iraqi Regular Army in 1990, with 500 remaining in 2002.
The T-55 “Enigma” was an Iraqi attempt to upgrade the armour of the ageing T-55 during the 1980s. The Iraqi designation of this unique type is unknown – the name “Enigma” was bestowed on the vehicle by Coalition forces during the 1991 Gulf War.
The Enigma appears to have been used as a Command vehicle in regular T-55 units. The type saw combat against Coalition forces in 1991, although the additional armour appears to have done little to protect it from heavy losses.
TAMIYA’S 1:35 SCALE T-55 ENIGMA
Tamiya’s 1:35 scale T-55 kit was originally released in 2002 and became an instant classic thanks to its high level of detail, accuracy and ease of assembly.
Tamiya took advantage of this base kit to deliver an Iraqi T-55 Enigma in 2012.
Although the running gear, lower hull and some of the detail parts are from the original boxing, much of this kit is new or modified.
The new Enigma kit is packed under typically attractive Tamiya box art.
Now moulded in dark yellow, Tamiya’s 1:35 scale T-55 Enigma comprises approximately 382 plastic parts, four large polythene caps, ten small polythene caps, I small sheet of vinyl mesh and two full-length flexible vinyl tracks. Two of the sprues and the upper hull are brand new, while the turret has also been modified to accommodate the armour segments and other fittings.
All the parts, whether from 2002 or 2012, are moulded to the same outstanding level of quality.