Project
It’s time for my monthly update on the Ninja Project and I have been making more steady progress. Firstly my oil cooler adaptors arrived which meant I could finally make up the oil lines and connect the cooler up – sounds nice and simple, doesn’t it? In reality that wasn’t the case – the braided hose is thicker than the standard oil lines which meant the lower frame rail didn’t allow enough clearance to fit the hose on one side. It was easy enough to fix; I just filed a bit of a groove in the frame rail.
Unfortunately, the frame rail needed to be removed to do this, which meant the exhaust pipes had to removed, which meant the radiator had to be drained and removed, as well as the oil cooler itself. So after virtually taking the bike entirely to bits again, getting itchy from the thermal wrap and covered in coolant, I managed to file a groove in the frame rail and get the clearance I needed.
Lisez l'article complet et bien d'autres dans ce numéro de
Fast Bikes
Options d'achat ci-dessous
Si le problème vous appartient,
Connexion pour lire l'article complet maintenant.
Numéro unique numérique
346
 
Ce numéro et d'autres anciens numéros ne sont pas inclus dans une nouvelle version de l'article
abonnement. Les abonnements comprennent le dernier numéro régulier et les nouveaux numéros publiés pendant votre abonnement. Fast Bikes
Abonnement numérique annuel
€40,99
facturé annuellement
Abonnement numérique de 6 mois
€21,99
facturé deux fois par an
Abonnement numérique mensuel
€4,99
facturé mensuellement