Need a few more switches? The 6 Shooter provides an easy-to-install solution to control your 12V accessories in your 4WD, canopy, or trailer without requiring you to run wires through your firewall. This waterproof, solid-state 12V power distribution system for your vehicle allows wireless control of your accessories. One connection to your battery gives you six fuse-protected outputs: two 30A circuits, two 10A circuits, and two 5A circuits. The whole system is protected by a 100A fuse installed on the positive-input wire. Control accessories inside or outside of your vehicle using the battery-powered RF remote control panel, which uses rocker-style switches. Magnets enable it to attach to needed surfaces outside or use available vehicle-specific mounting kits for inside your vehicle. Hardwire the remote base and give yourself individualized backlighting options. Use the smartphone app to control accessories and access the ability to do more, such as customize your lighting, with dimming or strobe options, monitor your battery voltage from the app, change switch behavior from standard to momentary. There is also a built-in DIN connector for use of conventional toggle switches, when used with the harness; sold separately. Same as the 4 Plus, several Trigger control boxes and remotes can be used together to control up to 24 accessories. It comes with a three-year warranty.