Mod Your PC With 3D-Printed Parts
YOU’LL NEED THIS
3D PRINTER
You’ll also need a drill and drill bits, M3 nuts and bolts, and possibly some sandpaper and spray paints.
THERE’S A VAST NUMBER OF WAYS in which you can customize a system: using vinyl or paint, installing a full hardline loop, or even modifying the case using hand tools to create a new look. They’re all great ways in which to start modding, but over recent years and thanks to its growing popularity, 3D printing has become an excellent choice for adding a personal touch to a build.
The addition of 3D printed parts can really impact the final look of a system, taking it from mediocre to standout. When there are so many builds based in the same cases, using distro plates or generic layouts, things can get a bit dull. Taking a step away from the norm or current trend can be daunting, but with a little planning and a 3D printer, you can step out of the shadows of a generic build and into a truly modified system.
We are going to take you on the start of this journey, with a simple guide to 3D-printing a reservoir mount, and once you have the basics nailed down, who knows what you will be designing and printing for your next build? –
KRIS BUTTERILL
A
© SKETCH UP
1 PRELIMINARY POINTS
Planning is the key to any build; this counts for the aesthetics, too, even at the hardware stage. If the idea you have for a layout is not physically possible with the hardware at your disposal, it might be time to re-evaluate. The use case of the system will always be the priority, but exchanging certain components may offer the same performance and quality, while offering greater flexibility in terms of how the system can look.